PUDU MT1: autonomous sweeping for commercial facilities

    Watch ERA Robotics’ PUDU MT1 autonomous sweeping robot video. Explore its dry-cleaning role and the practical checks that help match it to your facility.

    By ERA Robotics ·

    What does the PUDU MT1 clean?

    The PUDU MT1 is an autonomous sweeping robot for repeatable dry-debris collection in commercial facilities. It is a different cleaning tool from a scrubber dryer: sweeping collects loose material, while scrubbing addresses floor soils using water and recovery.

    On its MT1 manufacturer page, PUDU lists dual-disc brushes, a 70 cm practical cleaning width and a 35 L waste container. PUDU also describes active dust control using negative-pressure ventilation and filtration. These are manufacturer specifications, not measured outcomes from this video.

    AI recognition and targeted sweeping

    PUDU describes AI cameras that identify debris and an AI spot-cleaning mode that targets detected waste during patrols. Its published navigation system combines LiDAR SLAM and VSLAM, with multi-sensor obstacle avoidance.

    The useful question is not simply whether the robot can move around a building. It is whether a mapped route collects the right debris at the right time, without conflicting with operations. Confirm floor conditions, lighting, route changes, obstacles and restricted areas during a site assessment.

    Warehouse and manufacturing cleaning considerations

    For warehouses and logistics facilities, review aisle access, loose packaging debris, traffic crossings and the area that can actually be cleaned. Charging and waste handling need accessible locations that do not obstruct staff or vehicles.

    In manufacturing facilities, assess debris types and production-adjacent routes separately. Hazardous dust, liquids and specialist cleaning tasks require their own review; this video does not establish suitability for them.

    See ERA’s warehouse cleaning robot site-review page to compare sweeping and scrubbing needs and request an assessment.

    See the MT1 in different environments

    ERA’s separate videos show MT1 supermarket aisle sweeping and MT1 dust and woodchip sweeping in manufacturing. Each setting raises different questions about routes, debris and remaining manual tasks; a short clip is not proof of universal suitability.

    Compare the MT1 with the MT1 Max and scrubbing options in the commercial cleaning robot range. The Max has a distinct 3D LiDAR perception system; do not assume every MT1-family model has the same configuration.

    People make robots work

    ERA Robotics assesses, deploys, trains and supports commercial robots across Australia and New Zealand. Staff remain responsible for agreed operating checks, exceptions, consumables and maintenance. A good deployment makes those responsibilities clear alongside cleaning zones and schedules.

    The optional MT1 and MT1 Max Auto-Empty Station can extend waste transfer, subject to compatibility and setup approval. Staff still manage the receiving bin and equipment upkeep.

    Use the MT1 ROI calculator with your own cleaning workload. Time released for other tasks is not automatically a cash saving, and this product video does not prove a specific cleaning rate or payback period.

    Suitability, configuration and results are subject to site assessment and approval.

    Request a Warehouse Site Review

    Comparing options for your site? Explore ERA's full range of commercial cleaning robots — autonomous scrubbers, sweepers and robotic vacuums supported across Australia and New Zealand.